Skip to main content
It looks like you're using Internet Explorer 11 or older. This website works best with modern browsers such as the latest versions of Chrome, Firefox, Safari, and Edge. If you continue with this browser, you may see unexpected results.

Penn Health Tech Covid-19 Rapid Response Team - PPE production crowdsourcing: Face-shield crowdsourcing

READ FIRST! 

Please make sure you fill out the volunteer form (3-D Printing, Shields) before you start printing as we need to coordinate with you in order to put your efforts to best use. 

3D printing

STL file

Print settings &
optimization

Inspection, packing &
pick-up instructions

Modified version of the 3DVerkstan design with a wider brim for manually-cut shields using a 3-hole puncher

 

original design

 Print Settings & Optimization

Quality inspection checklist

Packing:

  • Please wipe down (e.g. with clorox wipes) or spray disinfectant on the outside of the bag after bands are packed into the bags
  • Label the bag: your initials, date, contents
    ex: "AB, 3/30, 17 frames"


Designate a pick-up location to ensure contact-less exchange (a box on your porch or outside your door, see example) and fill out this form to request a pickup! 

Shield fabrication

Disclaimer

 These materials/designs are provided "as is" with no express or implied  warranties of merchantability or fitness for a particular purpose or any other warranty (express or implied).  Penn makes no representation or warranty that the use of the materials will not infringe any patent or other proprietary or intellectual property rights of any third party.